top of page
Synology NAS Setup for Small Business in Malaysia

Synology NAS Setup for Small Business in Malaysia

Sep 16
6 min read

A lost drawing folder, a failed workstation drive, or an uncontrolled set of revised PDFs can delay a project far beyond the cost of the hardware. A properly planned Synology NAS setup for small business in Malaysia gives design and engineering teams a central place to store, protect, and manage project data without relying on scattered PCs and portable drives.

For architecture, construction, manufacturing, and technical design businesses, the goal is not simply to buy a NAS. The goal is to build a file system that supports real working habits: large AutoCAD files, Revit models, CAM data, tender documents, site photos, and tight delivery deadlines. That requires the right capacity, network design, permissions, backup plan, and user training.

Start With the Workflow, Not the NAS Model

The best Synology unit depends on how the business works. A five-person consultancy that mainly stores DWG files has different requirements from a 30-person BIM team working with large models, render outputs, and shared project folders.

Begin by reviewing the data your team creates each month, the number of staff who need concurrent access, and the largest files they open during normal work. Also identify which data must be available immediately and which can be archived. Many businesses underestimate growth because completed projects remain valuable for variations, maintenance work, disputes, and future reference.

A practical starting point is to plan usable storage for at least three years, while keeping drive bays available for future expansion where possible. RAID protects availability when a drive fails, but it does not replace backup. That distinction should shape every purchasing decision.

For small teams, a four-bay Synology NAS often provides a sensible balance between capacity and redundancy. Businesses with heavier workloads, multiple departments, or larger retention requirements may benefit from six, eight, or more bays. The model should also be selected based on processor performance, memory expansion, network ports, and whether it supports the applications your business expects to use.

Choose Storage for Protection and Performance

Business NAS storage should use NAS-rated hard drives built for continuous operation. Consumer desktop drives may appear cheaper initially, but they are not designed for the same duty cycle, vibration environment, or recovery behavior in multi-drive systems.

For most small businesses, RAID 5 or Synology Hybrid RAID with one-drive fault tolerance is a reasonable starting point. It allows one drive to fail without immediately losing access to data. However, RAID 6 or two-drive fault tolerance is worth considering for larger arrays, high-capacity disks, or businesses where project files cannot be unavailable during a rebuild.

The trade-off is usable capacity. More redundancy means less space available for files. The right answer depends on the cost of downtime, the quality of your backups, and how quickly replacement drives can be sourced. For a technical team working against a submission date, restoring several terabytes from backup may not be an acceptable recovery plan.

Solid-state drives can be useful for cache or for specialized high-speed workloads, but they should not be assumed to solve every performance issue. In many offices, slow file access is caused by a 1GbE network, aging switches, Wi-Fi usage, or poorly managed workstation storage rather than the NAS disks themselves.

Plan the Network Around Actual File Sizes

A central file server is only as responsive as the path between the workstation and the NAS. Gigabit Ethernet can be adequate for light document sharing and smaller CAD teams. For frequent work with large drawing sets, point clouds, video, or Revit-related assets, 10GbE can significantly reduce waiting time when the NAS, switch, and workstations all support it.

Keep primary design workstations connected by wired Ethernet. Wi-Fi is convenient for meetings and mobile access, but it is not the preferred connection for opening and saving production files. A managed switch, quality cabling, and a UPS for the NAS and networking equipment are practical investments. In locations where power interruptions occur, the UPS gives the NAS time to shut down cleanly and helps prevent file-system damage.

Build a Folder Structure People Can Follow

Technology cannot fix a project directory that nobody understands. Before migrating files, agree on a consistent folder structure and naming standard. The structure should make it clear where current drawings, issued documents, reference files, models, exports, correspondence, and archived revisions belong.

For example, project folders can be organized by project number and project name, then divided into controlled areas for design, client-issued information, submissions, construction documentation, and administration. Avoid creating individual user folders inside active project directories unless there is a clear purpose. Files that live only in one designer's personal area are difficult to review, back up, and hand over.

Permissions should follow job responsibilities, not convenience. Management may need visibility across projects, while external collaborators may only need access to a specific exchange folder. Separate read-only issued-document folders from working folders so that approved drawings are not accidentally overwritten.

Synology's user and group management tools make this easier when they are configured from the start. Create groups such as CAD team, project managers, finance, and external consultants, then assign permissions to groups rather than adjusting rights user by user. This reduces administration and makes onboarding or offboarding more controlled.

Treat CAD and BIM Files With Care

A NAS is highly effective as a central storage location for AutoCAD drawings, PDFs, specifications, and many common project files. It also supports a disciplined approach to revisions, access control, and backup. But collaboration requirements differ by application.

For Revit worksharing, performance and reliability depend heavily on local network speed, model size, software version, and the approved collaboration workflow. A local NAS may be used in certain office-based central-model scenarios, but remote users should not open a live central model across an ordinary internet connection or consumer VPN as though they were on the office LAN. Latency, interrupted connections, and sync conflicts can create serious model risk.

Teams with remote BIM collaboration needs should assess whether a cloud collaboration platform, a remote desktop workflow, or a hybrid approach is more appropriate. The NAS can still play an important role as protected local storage, a backup destination, and an archive for issued deliverables. The key is to match the storage design to the software workflow instead of forcing one tool to perform every role.

Make Backup Independent of the NAS

A NAS with RAID is not a backup strategy. It can still be affected by accidental deletion, ransomware, theft, fire, water damage, administrator error, or multiple disk failures. Small businesses need at least one recoverable copy outside the main NAS.

A practical approach follows the 3-2-1 principle: maintain three copies of important data, on two different media types, with one copy offsite. For many businesses, this means production files on the NAS, a local backup to a separate device, and an encrypted offsite copy to cloud storage or a second NAS at another location.

Configure automatic backups on a schedule that matches the value of the data. Daily backups may be sufficient for administration records, while active design folders may require more frequent protection. Snapshots are also valuable because they can provide fast recovery from accidental changes or ransomware encryption, especially when snapshot retention is protected from ordinary user access.

Recovery testing matters as much as backup completion messages. Periodically restore a sample project folder and open the drawings, models, and associated files on a workstation. A backup that cannot be restored under pressure is not a business safeguard.

Secure Access Without Making Work Difficult

Remote access is useful for managers, site teams, and approved staff, but it must be controlled. Use individual accounts, strong passwords, multi-factor authentication, and role-based permissions. Disable unused accounts promptly, especially when contractors or temporary staff complete their assignments.

Keep Synology DSM, installed packages, and workstation security tools updated. Restrict administrative access, avoid sharing a single admin login, and review system notifications so failed disks, unusual login attempts, and backup errors are seen early. External sharing should be limited to specific folders and expiry periods rather than opening broad access to the entire file server.

Businesses handling employee, customer, or project information should also consider their responsibilities under Malaysia's Personal Data Protection Act. Technical safeguards, documented access practices, and controlled retention policies help support responsible data handling.

Implement in Stages and Train the Team

The cleanest deployment is rarely a single overnight migration. Start with a pilot group or one active department, validate file access and permissions, then move remaining data in planned batches. Keep the old storage read-only for a short transition period so staff can confirm that files arrived correctly without creating two competing versions.

Training should be brief but specific. Staff need to know where projects belong, how to request access, which folders are read-only, how to save revisions, and what to do if a file appears missing. These small habits protect the investment more effectively than adding hardware after problems appear.

BLY Technology can support businesses that need their NAS implementation aligned with wider IT, CAD, and BIM operations. The strongest result comes from treating storage as part of the working environment, alongside capable workstations, trained users, and reliable support.

A well-planned NAS should become quiet infrastructure: project data is organized, protected, and available when the team needs it, leaving engineers and designers to focus on the work that moves the business forward.

 
 
 
bottom of page